Bugs 2 SE is a new series. It is friendly for beginners for its GPS Positioning, One Key Return, One Key Takeoff/Landing features, which make flight easier. Bugs 2 SE series is amazing for experienced pilots with its advanced Brushless Motors, Built-In 1080P WiFi Camera, and 2.4 GHz Two-Way Communication technology, it means the flight will be more powerful and reliable, the image quality will be more excellent, and the control range is up to 500-600 m.
The onboard camera has been redesigned to use a 1080P 5G WiFi FPV camera, which enables the drone take clear pictures when flying at high speed.Advanced sensors and processors ensure everything is captured with more image detail and the image data needed for advanced post-production.
The on-board 1080P HD camera has been designed to use the 160 degree wide angle lens, which allows more of the wonderful scene to be included in the photograph.
Support shooting 1080P 25fps with 8 megapixel photos, wide-angle lens, retain the most original details, make your creation more inspirational
Image Sensor: 1/3.06 Inch; CMOS; 2MP
Video Resolution: RAW： 1080P@25fps;
Images Transmission Distance
More than 1km remote control distance, 1080P zero-latency real time images transmission & 300 meters FPV distance
Full High Definition 1080P 5G Wifi Camera Works Perfectly with MJX APP "Bugs GO"
The onboard 1080P 5G Wifi camera lets you see what your aircraft see, idea for framing a spot or simply to look around and admires your surroundings after the camera is linked to the APP "Bugs GO".Learn more
Global positioning system offers worry –free flight
Your Bugs 2 SE is always under control. State-of-the-art GPS system makes the Bugs 2 completely aware of its location and relation to you. It hovers precisely, moves accurately, and locks onto satellites fast. 3 types of Return-to-Home (RTH) are designed to protect your Bugs 2 SE.
If the GPS signal is available (more than 7 satellites is presented) and the home point is recorded previously, press this button, the aircraft will fly back to the home point. During the smart RTH, you can use the remote controller to guide the aircraft around obstables. You can press the RTH button again to exit RTH procedure and regain the control of the aircraft.
If the GPS signal is available (more than 7 satellites is presented) and the home point is recorded previously. Failsafe RTH will be triggered if the remote controller signal is lost for more than 6 seconds, the fly control system will control the aircraft automatically and the aircraft will fly back to the last recorded Home Point. You can regain control of the aircraft by press the RTH button if the remote controller signal is recovered.
Low voltage RTH
When the aircraft's rear lights flash red slowly, battery icon “ ” is shown on the LCD screen, and steady beep, beep, beep..., beep, beep, beep sound is heard. At this moment, as long as the aircraft flying altitude is over 100 meters or the flying distance is over 300 meters, the aircraft will automatically fly back to the Home Point.
When the aircraft's rear lights flash red slowly, battery icon “ ” is shown on the LCD screen, and steady beep.., beep..., beep sound is heard. At this moment, as long as the aircraft flying altitude is over 15 meters or the flying distance is over 15 meters, the aircraft will automatically fly back to the Home Point. If the aircraft flying altitude is less than 15 meters or the flying distance is less than 15 meters, the aircraft will automatically land to the ground.
Advanced GPS-assisted hovering
Under GPS mode, when the aircraft receives the signal from satellites, it will position where it is. Once there’s external interference, the aircraft can re-locate its current position and keep flying stable.
Barometer altitude hold
The aircraft adopts advanced barometer to remain altitude hold and hovering. After successful signal connection, pilot push the throttle and then free it, the aircraft will hover perfectly in place. Your hands are free from the control stick to capture aerial photography.
Module-designed Li-polymer battery
The Slide-in battery makes it much easier, safer and more convenient to prepare your Bugs 2 SE before flight.
Smart remote control alarm function
The transmitter buzzer receives the voltage status of the drone will send out beep sound once the drone is in low volatage. so , your drone is always under control. The transmitter buzzer will send out beep sound once the remote control signal is weak or interferenced. Your flight is always safe.
Intelligent control, excellent grip
Compact and intuitive handling with comfortable tactile silicon and vibration signals make this remote control very convenient. The advanced two-way wireless technology offers a reliable connection between the remote control and the Bugs 2 SE.
The BUGS 2 SE have feature superior & powerful brushless motor and all-in-one functions. Brushless motors deliver the power for smooth flight and stable hovering. MJX expects that the BUGS 2 SE drone would bring users an exceptional flying experience no matter on flying time or flying posture.
MT 1806 1800KV brushless motor is designed for Bugs 2 SE . It features metal shell, good cooling performance, advanced inner electromagnetic construction, and working steadily in high speed.
Bugs series aircraft equipped with precision aerodynamic propellers, which have strong force and excellent balance to enable the aircraft to perform well and capture sharp images even added FPV module.
MJX Unique motorbraking system
Each motor is managed individually by the Electronic Speed Controllers. And the innovative auto-braking system is mounted on the ESCs that not only effectively protect the motors, but also insure safety of flight.
4 Glorious LED lights assist Night Flight
The bright LED lights made night flying as easy as flying in the day. Your Bugs 2 SE looks cool and attractive.